Access Control System

The communication between the access control machine and the remote control host is all via wireless transmission. Installation is simple (without the need for wiring), and usage is convenient.

The following is the usage method for the fingerprint reader: ① Administering fingerprint entry: * → # → 1234 # → three fingerprints → a long beep → successful setup (the administrator’s fingerprint cannot be used for door opening and closing operations) ② Changing the unlocking duration to 1 second: × → well → fingerprint of the management officer → beep once → 4 → 1 → well → × exit, set the emission action duration to 1 second. This step must be changed, and the operation response speed will be more sensitive. ③ Adding a fingerprint: * → well → fingerprint of the management officer → beep once → # → employee number (002#) → three times → a long beep → successful entry (the newly added fingerprint can be used for opening and closing the rolling shutter door operations) ④ Adding a password: * → well → finger of the management officer and → beep once → 37 number 1 → new code (twice) → speak → beep once → OK swipe card: → # → administrator push → merchant well → employee number 002# → swipe card →嗝 once → OK. ⑤ Restore factory settings： Power on for 30 seconds → beep once → press the white switch three times.

The above is the face recognition ten-card access function…… Access control system for doors The advantages of our controller compared to products in the same industry are that the transmission between the controller and the fingerprint reader is wireless, making installation simpler and easier. ①: Figure 1 shows the password and ten-card type access. ②: Figures 2-3 are simple keypad type wireless password switches. ③: Figure 4 shows the multi-function of password, ten-card, and fingerprint. When using for the first time, the unlocking time must be set to 1 second (the factory setting is 10 seconds). ⑤: Figure 5 is the face recognition (face scanning) ten-fingerprint ten-password ten-card full-function control system. The following is the usage method of Figure 4: password, ten-card, and fingerprint.

Previous：DC24V UPS

Next：Sliding door motor