DC24V UPS

8c07c4e27905200f4409ad9da9c77c3b

24V AC/DC Control Box Product Introduction: Figure 1 shows the ordinary AC/DC control box. Figure 2 is the current detection bidirectional resistance control box (the upgraded version can adaptively learn resistance sensitivity). Figure 3 is the Bluetooth mobile phone opening control box with current detection and bidirectional resistance (the upgraded version can adaptively learn resistance sensitivity). Figure 4 is the WiFi remote mobile phone opening control box with current detection and bidirectional resistance (the upgraded version can adaptively learn resistance sensitivity). On the mobile App, the battery voltage of the control box, the working current of the motor when opening and closing, and push notifications when encountering resistance or when opening and closing can be displayed. It is more intelligent. Panel indicator light explanation: The yellow light in the middle of the AC/DC control box indicates: ① Flash once per second indicates receiving 433 signal (or 433 interference) ② Flash three times per second indicates the battery is charging in high current. ③ Always on indicates the battery is under-voltage. (Reminder: If the left power indicator light on the panel is not on or the buzzer sounds once every second when the motor is running, and it keeps beeping for more than 5 times, it indicates that the control box is not connected to the power supply. Please check the plug for power supply.) ④ Buzzer alert sound indicates: A: Three beeps per second, indicating abnormal limit position (or public terminal error or open circuit of upper and lower limit positions) B: Long beep (about one second, normal operation beeps for about 0.5 seconds) indicates reaching the limit position (cannot operate in the same direction as the current remote control) and when the customer presses “lock”, then press open or close, it will beep twice, press the stop button to unlock, and then it can be normally opened and closed. C: The buzzer keeps beeping and the middle indicator light (under-voltage charging) of the panel keeps constantly on indicates that the battery is under-voltage. Timely charging (or replacement is required) ********** The switch power supply beeps 5 times indicating overcurrent of 18A or more.

Previous：Roller shutter motor/tubular remote control

Next：Access Control System