4G Remote Patented Product

4G Remote Patent Product (Three-in-One All-Function):
4G Remote Door Opening + Power Failure Notification + Electronic Obstruction + Voice + Door Opening Control (WeChat Official Account) and App are all for information notification.
It is widely used in: roller shutter door motors, tubular motors, AC/DC UPS, swing door motor, sliding door,garage door motor etc.. If the remote control can automatically open the door, please lock it first.

一: You can remotely unlock the door using your mobile phone without Wi-Fi. The setup is simple and successful in just 5-10 seconds (only requires 5-10 seconds). There is also a current interruption stop protection (differences in models). The data traffic is free for the first year, and starts at ¥25 per year from the second year.
二: 1,Normal state: Red light flashes quickly, green light is constantly on.
2, Abnormal state: 2-1: Poor base station signal or no base station signal (no card), red light goes off for a long time and then flashes (green light is constantly on), and periodically flashes (every 6 times) and then goes off for 2 seconds before repeating periodically. 2-2: Card is normal, red light is long on and then off (green light is constantly on), dialing fails, possibly due to poor base station signal.2- 3: After powering on for 1 minute, the green light flashes on and off for 2 seconds each time, the red light also flashes quickly, indicating that there is dialing but no connection to our MQTT server. The reasons could be that the card is overdue for payment or the card has not been unbound. 2-4: Green light is off, red light flashes, indicating that the device has been “locked”.

1. Adjust the size door mode. There are three settings: large, medium, and small. First, press 1 to lock, then hold the down key for 3 seconds to switch between the large, medium, and small doors. The default setting is the medium door. (The operation is valid within 30 seconds after startup)
2. (The operation is valid within 30 seconds after startup) Adjust the delay mode. There are 5 settings. First, press 1 to lock, then hold the lock key for 3 seconds to switch the settings. The default setting is the 3rd setting, with medium sensitivity. The 1st setting has the highest sensitivity.

3. Set the glass door mode. There are 3 levels. The setting method is as follows: first press the lock button once, then press the upward key for 3 seconds to switch the level. The default is level 1, which turns off the glass door mode. Level 2 starts to descend from the upper position within 10 seconds and the level automatically decreases by 1 level. Level 3 starts to descend from the upper position within 15 seconds and the level automatically decreases by 1 level.

4: Reboot the device for 10 seconds and then restart it within 30 seconds. Press the stop button on the handle for a long time to restore the factory settings. The buzzer will make a sound to alert you. The operation is successful. All these operations must be performed within 30 seconds of turning on the device. If it exceeds 30 seconds, press the stop button on the handle (to turn off or turn on the language sound). 4: 4: The method for restoring the factory settings of the Kebai type: (operations within 30 seconds are valid). Press the stop button on the handle for about 5 seconds, and the receiver will make a “beep” sound. The device will be forcibly restored to the factory settings. After turning on the device, if it exceeds 30 seconds, it will make a “beep beep” sound. 4: 4: The method for restoring the factory settings of the tube type and the external attachment: (operations within 30 seconds are valid). Press the stop button on the handle for about 5 seconds, and the receiver will make a “beep” sound. The device will be forcibly restored to the factory settings. After turning on the device, if it exceeds 30 seconds, it will make a “beep beep” sound. 。。。。。。。。。。。。。。。。

5: Method for adjusting sensitivity when encountering resistance: Press the “lock ten stop” button simultaneously with the switch to stop at the resistance point (one sound), then rebound for 5 seconds (two sounds), and finally rebound to the upper limit position (three sounds), then switch. Sensitivity setting: Press the “lock” button once, then press “up ten down” simultaneously (for about 5 seconds). Press the up key to increase the gear (decrease sensitivity, corresponding to larger doors), and press the down key to decrease the gear (increase sensitivity, corresponding to smaller doors). ……

6: Voice off and on: After power failure and re-powering, if the device is turned on after more than 30 seconds, it will make a “beep” sound twice. Press the stop button of the handle for a longer time, and it will beep once to turn off the voice, and two beeps to turn on the voice. Additionally, if the remote control is not plugged into the motor and there is no current, pressing the handle will not have voice playback. Make sure to have the motor on for it to play. Remember, ……

7: Disable electronic resistance: Press the “lock” button once, then press “up ten down” simultaneously (for about 5 seconds). Press the down key of the handle, and when you hear the first gear, press the down key again, and it will beep once (0 gear) to disable the resistance function.

4G type connection type, specifically designed for horizontal and vertical sliding gates of the barrier gate.

4G mobile phones can be remotely modified to have functions such as sliding, swinging open, and double-door opening.

Resetting to factory settings method: (Effective within 30 seconds after turning on the device), Press and hold the stop button on the controller for about 5 seconds. The receiver will make a “beep” sound, and the device will be forcibly reset to factory settings. After turning on the device for more than 30 seconds, it will make two “beep” sounds.

4G86 Kebao Operating Tutorial

4G86 copy Operating Tutorial

Method for adjusting the sensitivity of electronic resistance measurement (the most sensitive setting is at level 1)

The adjustment method for the large, medium and small gates of the electronic stop mechanism (the small gate is the most sensitive)

Electronic resistance delay mode adjustment method (most sensitive one)

Previous：Australian Motor Controller

Next：86 Wireless Switch Products