{"id":793,"date":"2025-09-27T23:49:58","date_gmt":"2025-09-27T15:49:58","guid":{"rendered":"https:\/\/www.re-motor.com\/?p=793"},"modified":"2025-09-27T23:49:58","modified_gmt":"2025-09-27T15:49:58","slug":"ac-ups","status":"publish","type":"post","link":"https:\/\/www.re-motor.com\/?p=793","title":{"rendered":"AC UPS"},"content":{"rendered":"

\"\" \"\"\"\"<\/p>\n

\"\" \u00a0\"\"<\/p>\n

AC UPS (Inverter 220V AC) Product Introduction:<\/p>\n

Figures 1-2 show the 600-800 (aluminum core 300w) universal external tube-shaped motor power failure protector. Figures 3-4 show the 800-1000 kg (below 550w) power failure protector. The display shows \u2460 AC indicates the presence of mains power, \u2461 DC indicates the absence of mains power (in standby mode), \u2462 if there is a display of the number 24.5v, it indicates that the inverter has an inverter output voltage, and when mains power is restored, the number represents how long the inverter was used during the last power failure. This inverter can be used for external and tube-shaped motors, sliding doors, telescopic doors, gates. This power failure protector for this product can also be applied to household computers, fans, etc. All of the above products have remote control start (energy-saving mode) or power failure self-start, two modes, convenient for customers to choose.<\/p>\n

\"\" \u00a0\"\"<\/p>\n

For the 800-1000kg mode selection, switch it to the right position (RF) as shown in Figure 1. When the power is off, press the handle to emit a 5-8 second high-frequency signal (the frequency selection is determined by the red four-digit switch as shown in Figure 2) to start the power generation. This mode is more energy-efficient and power-saving. Switch it to the left position (AUTO), and when the power is off, it will immediately start generating power continuously (no need to press the handle for a long time), which is convenient, but it consumes more power.<\/p>\n

\"\" \"\"<\/p>\n

600 – small 800kg mode. The switch is positioned as shown in Figure 1 at the upper RF position. When the power is off, press the handle to emit a 5-8 second high-frequency signal (the handrail frequency is determined by the red four-digit switch as shown in Figure 2) to start the power generation. This mode is more energy-efficient and power-saving. If the switch is set to AUTO, the power generation will continue immediately when the power is off (no need to press the handle for a long time), which is convenient, but it consumes more power.<\/p>\n

\"\"<\/p>\n

24\u00d712\u00d735.5
\nThis is the product packaging\u00a0 600 – 800 kg in size.<\/p>\n

\"\" \"\"<\/p>\n

800 – 1000 kg packaging<\/p>\n

\n